1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 5.00 LPA
Job Profile for QA/RA : 2 -3 Years of Experience
? Experience to prepare and review the documentation required for the ISO 9001:2015,EN ISO 13485: 2016, Quality management System, WHO-GMP, EU MDR 2017/745,IMDR 2017.? Knowledge and preparing documents such as Quality Manual, Site Master File, SOP’s,Change Control, Deviation, CAPA, Incident, and ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.20 LPA
Experience to prepare and review the documentation required for the ISO 9001:2015, EN ISO 13485: 2016, Quality management System, WHO-GMP, EU MDR 2017/745, IMDR 2017.
Knowledge and preparing documents such as Quality Manual, Site Master File, SOP’s, Change Control, Deviation, CAPA, Incident, and Customer complaint, Management Review Meeting, pdate Harmonized Standards, ...
1 Opening(s)
15.0 Year(s) To 18.0 Year(s)
9.00 LPA TO 12.00 LPA
Degree in Engineering with 15 years or Diploma in Engg. With 18 years of Construction Experience. Out of the experience, at least 5 years should be as QA/QC Manager.
lead QA/QC Engineer shall be a qualified internal auditor of ISO 9001.
Responsibilities
Preparation and implementation of QA/QC policies and procedures
Carry out audits for ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.00 LPA
To check critical machining items like Covering plate, Eccentric shaft,
Shekhar Shaft, Bearing houshing etc. on priority base.
To check critical fabrication/machining item like Beams, Side frames, Base
plate, Mixer frame,4 Bin hopper/legs etc.
To perform any types of on-site inspection work at suppliers premises.
To check all mould parts and moulds precise, accurate and ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 3.60 LPA
Job Responsibilities :
To ensure the quality of incoming material confirm that the finished product meet with the standards prescribed by the company
To ensure that the quality of finished dispatched product is as per statutory contractual requirements to meet customer satisfaction
To arrange timely calibration of measuring test equipment of lab
To ensure ...
2 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.50 LPA TO 2.40 LPA
Should have Minimum 1 year of experience as a Lab Chemist (Preferred Enzyme Industry)
Should have basic knowledge of Laboratory analysis
Should have knowledge of basic calibration processes of all Laboratory Equipment
Knowledge of Basic Analytical Calculations
Good command over MS Office
preferably Female
Education : B.Sc / M.sc / Biotechnology / Biochemistry / Chemistry
Location : ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 3.00 LPA
Authorization of all procedures and standard instructions of process, controls etc
Investigation and closure of all deviations, OOS and complaints
Conducting self inspections.
Conducting vendor evaluation of raw materials.
Should have sound knowledge of Process validation. Should be familiar with preparation of process validation protocol and report.
Should have sound knowledge of QMS System and ...
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
Not Disclosed by Recruiter
ensure manufactured products meet the specified standards and specifications of the drawing and the parts meet quality standards.
Follow standardized procedures and instructions for in process and final inspections across a wide variety of customized parts and assemblies with very close tolerances and specifications.
Determine method of inspection and set up requirements ...